Open Floor Studio Open Bed Platform Studio Open Wall Studio Open Cabinet Studio Assembly type One component type per assembly. My Rigs will bring finished assemblies together; that connection is not implemented here.
Assembly layout Wall Studio Cabinet Studio Floor Studio Bed Platform Studio Parts & weight My Assemblies Project Build List Rig Layout Preview Rig Layout Preview Click a visible assembly to select it; drag to orbit. Move whole finalized assemblies with arrow controls or positions. Placement locks protect their location; edit contents in the studios.
Datum: interior floor surface is Z = 0. A modeled floor platform can sit below this surface. Baseline height is measured upward from it.
Add missing from build list Adds suggested starting positions. Existing placements and pinned revisions are retained; reduced quantities are not removed automatically.
Undo layout change Redo layout change
Red outline: fit issue. Pale outline: selected assembly. Mattress/pillow guides participate in space checks even when hidden. Checks do not validate support, access or moving clearances.
Download rig-layout snapshot Standalone preview only. Actual Builder and My Rigs are unchanged.
Plan your finished assemblies Add locked assemblies and quantities. Working drafts and revision history are not automatically counted. Save to my account to keep this list with the project.
Undo list change Redo list change
Download build-list cuts CSV Download build-list snapshot
Each entry pins one revision. A newer revision never changes this list automatically. Imported assemblies are available after being reused in this project.
Component assembly Arrange complete components. Duplicate a component to add another copy end to end, then adjust its position.
Assembly name
Undo draft change Redo draft change
Undo covers draft changes in this open session. Finalized revisions remain saved.
Finalize this assembly One finalized assembly preserves its component parts and weight. Grouping does not engineer joints or merge boards.
The project envelope is a size reference. Finalized assemblies use their own local origin. This is not your whole-rig layout.
Wall Studio
Choose a preset, set dimensions and stud spacing, and add openings. Complete wall sections connect end to end. Individual boards are generated for you.
Start from a wall preset Use wall preset as new section Presets start a new draft. Placed wall sections stay unchanged.
Add this wall section to run Finalize wall snapshot Add saved wall section
Cabinet Studio
Choose a preset, adjust it, then add it to the row. Each different cabinet keeps its own design.
Start from a preset Use preset as new cabinet A preset starts a new working cabinet. Cabinets already in your row stay unchanged.
Add this cabinet to row Save component revision only Place finalized cabinet in rig
Floor Studio
Configure a complete floor; joists and decking cuts are generated for you.
Baseline floor presetFramed floor with decking Lightweight 2×2 floor Framing only Decking only Size new floor to baseline Rectangular footprint only. On V-nose or rounded-front projects, the nose area is excluded.
Apply floor to assembly Save floor component revision Use saved floor component
Joist sizes and spacing are design inputs, not structural approval. Existing trailer floor, insulation, finish flooring and equipment are excluded unless separately modeled.
Bed Platform Studio
Configure a complete bed platform, including its storage and cut parts.
Start from a bed preset Use bed preset as new design
Apply bed to assembly Save bed component revision Use saved bed component
Presets are starting dimensions. Confirm mattress fit, load support and storage access before construction. This standalone test does not update the original Bed Studio experiment.
Combined parts & weight CURRENT ASSEMBLY · ESTIMATED WEIGHT 0 lb
Combined material cuts Material Stock Cut size Qty Est. weight
Download combined parts CSV Planning weight assumptions These are editable illustrative assumptions, not measured material properties. They apply to new snapshots. Existing finalized estimates stay fixed.
Parts are derived from the generated dimensions, including ¼-inch cabinet backing. Purchase nesting, kerf, joinery, structural design, glazing and equipment weights are not validated. The wall window pane is a guide and is excluded from weight. Drawer boxes are modeled with half-inch sides and quarter-inch bottoms; slides and pulls are included only through the editable hardware allowance.
Save & restore this standalone project Saved in this browser, scoped to the account and project read from the baseline. Use Save to my account for a private server copy, or download a backup. Production Garage and My Rigs are unchanged.
Download project backup Restore project backup Save to my account Checking account saving…
Save to my account Open account save
Account saves are private to you and this project. Saving is explicit; browser changes do not overwrite your account save automatically.