BUILD THE CONNECTIONS. SKIP THE LOOSE LINES.

Electrical Studio 12V DC + 120V AC

Place a component. Connect its terminals. Let the wires find their way.

Opening your diagram…Browser backup · optional private account saves · separate from My Rigs.

Components & zones

Click blank zone space to edit. Drag its header to move; drag its lower-right handle to resize.

Add a component, then give it a name.

DEVICES

My component presets

Saved in this browser · not the shared catalog

Import preset library

120V AC

Fixed L / N / PE terminals · separate from 12V DC

Conversion equipment

Connect your way

Select a device and choose Connect device to add both wires together.

Click one terminal, then a matching terminal.

Or drag between terminals. The target snaps when you get close.

Drag a component’s body to move it. Right-click a component for actions. Its wires follow.

Crossing wires are separate. Only compatible terminals create connections. 12V DC and 120V AC use separate, typed terminals.

Positive +Negative −Wheel or pinch to zoom · drag blank space to pan · 20-unit snap grid · schematic, not to scale

Click a terminal to start a connection.

Import diagramSaved only in this browser. Export a backup to keep a separate copy.

CURRENT DIAGRAM · PLANNING CHECKS

Electrical Review

Conflicts are separate from missing information. Blank values remain unknown. This review is not system-design approval and does not update Weight & Payload.

Review area

YOUR PLAN AT A GLANCE

Connections & parts

12V DC loads & circuit schedule

Nominal 12V estimates from entered device loads. No diversity, startup surge or voltage-drop allowance. Ratings are recorded values, not recommended sizes.

120V AC loads & circuit schedule

Separate from DC. Nominal 120V operating-load estimates only; no power factor, startup surge, diversity or protective-device sizing. AC animation shows declared supply routes, not instantaneous current direction.

Component weight & zone locations

Known component weights only; wire weight is not calculated. Zone locations are approximate rig anchors, independent of diagram coordinates. This draft does not update Weight & Payload.

Zones & components

DC circuit overview by block

Connection review

Parts and entered lengths by zone

View components and connections

Component / connection	Details	Entered wire length	Status

This is a connection-planning diagram. Wire routes are visual; they do not calculate physical installation lengths. Enter actual lengths for your wire list. Fuse and block ratings are entered for comparison only. Wire sizing, voltage drop and fault protection are not calculated. Weight and zone locations use your entered data.