PLACE COMPONENTS. CONNECT THEIR PORTS.

Plumbing Studio Supply & wastewater milestone

Organize components in room zones and connect their ports. Arrange symbols for clarity; the builder determines physical placement and pipe lengths.

Components & zones

Click an outlet, then an inlet. Or drag between compatible ports. Move components; connected pipes follow.

Drag a zone header to move it; use its corner to resize. Components join or leave zones as their centers move.

Cold and hot stay separate at every pipe connection. Use a water heater between cold supply and hot devices. Grey-water and black-water drains stay separate from each other and from fresh water. This is a connection diagram, not a slope or venting design.

Supply previewPreview only · valve settings stay unchanged

Trace route

Opening your plumbing diagram…

Browser copy

STANDALONE · PLANNING SCENARIOS

Tank capacities & water weight

Keep empty equipment weight, tank water weight and combined weight separate. Each tank is counted once in each scenario; figures do not stack across scenarios.

Planning estimate: 8.34 lb per U.S. gallon for all tank contents, including wastewater. Actual contents and temperature can differ. Only fresh, grey and black tank contents are included; water in pipes, heaters, accumulators and sumps is excluded. Empty component weights are counted once. Materials/parts reports show empty component weights only. This preview does not update Weight & Payload, My Rigs, tank levels, valves or pumps.

CURRENT DIAGRAM · DECLARED CONNECTIONS

Plumbing Review

Review unfinished details and declared paths without changing any valve or pump settings. Path interruptions and drawing issues are separate from incompatible connections.

A reached path describes the schematic only. This review does not verify flow, pressure, capacity, pump sizing, drain slope, traps, venting, safe terminations or the physical installation. Reports cover all systems, including hidden ones. No settings are changed automatically.

CURRENT DIAGRAM · ENTERED INFORMATION

Parts & connections

Edit material & size on multiple lines

Select lines, then change material, size or both. Individual lengths are never calculated or replaced by bulk edits. One Undo restores the previous specifications.

Placed fittings & equipment quantities

Counts include only components you placed. Extra adapters, waste allowance and water weight are not inferred.

Placed components

Pipe materials schedule · service, material and nominal size

Totals use entered individual pipe lengths, not diagram route length. Missing lengths remain unknown. Connectors, fittings, waste allowance and water weight are not inferred.

Connection schedule

This milestone is a connection planner. It does not calculate flow, pressure, pump sizing, potable-water material suitability, heater performance, drain slope, trap or vent requirements. Pipe size and material are entered labels. Valve positions affect declared path tracing only; Fill/vent/overflow roles do not verify elevations, capacities, safe terminations or pressure protection. Previews assume selected source availability and do not establish backflow protection or hydraulic performance. Reports do not update other tools. Weight & Payload changes require a separate reviewed and confirmed transfer.