TNutz

TNutz – Reference Supplier for Extruded Aluminum

As I plan different parts of the cargo trailer conversion, I am strongly considering using
extruded aluminum (T-slot) for structural frames, bases, and modular components.
If I go that route, TNutz is one of the primary suppliers I will use for profiles, hardware, and accessories.
This page is a reference point for their products, pricing style, and how they might fit into my build.

Why TNutz Is on My Short List

  • Affordable profiles: Their 1″ x 1″ (1010) and other common sizes are priced competitively, especially in longer lengths like 96″.
  • Cut-to-length options: They offer both full sticks and cut services, which is useful for minimizing waste.
  • Compatible hardware: Brackets, corner connectors, anchor fasteners, and T-nuts are all available in one place.
  • DIY-friendly: Their catalog is straightforward and well-suited for custom projects like trailer conversions, workbenches, and modular furniture.

How I Plan to Use TNutz in the Build

If I move forward with extruded aluminum, TNutz will likely be used for:

  • Kitchen base frames: 1010 or similar profiles for the lower cabinet structure under the butcher block countertop.
  • Modular support frames: For mechanical bays, electrical enclosures, or removable panels.
  • Mounting structures: Frames for equipment like power stations, tanks, or HVAC components where adjustability is helpful.

The ability to bolt, adjust, and reconfigure components over time fits well with the long-term, serviceable design I’m aiming for.

Example Profile Reference

One of the main profiles I’ve looked at from TNutz is:

  • Profile: 1″ x 1″ T-slot extrusion (1010 equivalent)
  • Length: 96″ sticks
  • Use Case: Vertical legs, horizontal rails, and cross-members for the kitchen base and other frames.

I will use this page to keep track of which profiles and lengths I’ve evaluated, along with any cost estimates I generate for specific sub-projects.

Notes for Future Reference

  • Confirm final profile sizes (1010 vs 1020, etc.) based on load and span requirements.
  • Standardize on a small set of connectors and fasteners to simplify assembly and spare parts.
  • Document cut plans for each project (kitchen base, mechanical bay, etc.) to optimize use of 96″ sticks.
  • Compare TNutz pricing and availability with other suppliers only if project scope grows significantly.

This page will be updated as I refine which parts of the build will use extruded aluminum and which specific TNutz components I decide to standardize on.